BRDFB - 1417 BRU-TONE ALKYD SATIN ENAMEL WHITE

  • MSDS: BRDFB
  • Manufacturer: BRUNING PAINT CO INC
  • Product Name: 1417 BRU-TONE ALKYD SATIN ENAMEL WHITE
  • National Stock Number: 8010-00F028297
Product Identification

Product ID:1417 BRU-TONE ALKYD SATIN ENAMEL WHITE
MSDS Date:10/11/1989
FSC:8010
NIIN:00F028297
MSDS Number: BRDFB

Responsible Party
BRUNING PAINT CO INC
601 S HAVEN ST
BALTIMORE, MD 21224-4347
US

Emergency Phone: 301-342-3636AM/301-342-3641PM

Info Phone: 301-342-3636AM/301-342-3641PM

Cage: EO376

Contractor
KYANIZE PAINT
BALTIMORE, MD 21224 US

Telephone: 800-368-2076

Cage: 85520

Ingredients

V M & P NAPHTHA, LIGROINE, MINERAL SPIRITS

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 25-35%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 1-5%

OSHA PEL 20 MPPCF

ACGIH TLV: 2 MG/CUM (RESP DUST)


10.6

RTECS: 9999999WG


3.435

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION.
EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. MINERAL SPIRITS MAY CAUSE CENTRAL NERVOUS SYSTEM DEPRESSION
& MUCOUS MEMBRANE IRRITATION. SYMPTOMS INCLUDE DIZZINESS, HEADACHE,
INTOXICATION W/EUPH ORIA LEADING TO UNCONSCIOUSNESS.

First Aid

First Aid:EYE: FLUSH W/LUKE WARM WATER FOR 15 MINS. SKIN: WASH
W/COPIOUS AMOUNTS OF LUKE WARM WATER. INHALATION: REMOVE TO FRESH
AIR. RESTORE BREATHING IF REQUIRED. INGESTION: RINSE MOUTH
IMMEDIATELY. GIVE EXPO SED INDIVIDUAL 6 TO 8 OUNCES OF
LIQUID.(NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.)
DON'T INDUCE VOMITING UNLESS ADVISED BY A PHYSICIAN. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:104F
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:NATIONAL FIRE PROTECTION ASSOCIATION CLASS B
EXTINGUISHER IS DESIGNED TO EXTINGUISH NFPA CLASS 1B FLAMMABLE
LIQUID FIRES
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE
USED TO COOL CONTAINERS TO PREVENT PRESSURE
BUILD-UP/IGNITION/EXPLOSION FROM HEAT. FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. PRODUCT CONTAINER (EVEN EMPTY) MAY IGNITE
EXPLOSIVELY WHEN USING WELDING OR CUTTING TORCH.

Accidental Release

Spill Release Procedures:CONTAIN DISCHARGE. KEEP AWAY ALL SOURCES OF
IGNITION. VENTILATE SPILL. USE NON-SPARKING TOOLS FOR CLEANUP.
COVER W/INERT MATERIAL TO REDUCE FUMES. KEEP OUT OF
DRAINS/SEWERS/WATERWAYS. CONTACT FIRE AUT HORITIES. NOTIFY LOCAL
HEALTH/POLLUTIONAGENCIES.

Handling

Handling and Storage Precautions:KEEP CONTAINERS COOL/DRY. KEEP FROM
CHILDREN. DON'T SMOKE. CLOSED TIGHTLY AFTER USE. DON'T
CUT/PUNCTURE/WELD CONTAINER. AVOID SKIN/EYE CONTACT.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING/INHALING CONTENTS MAY BE HARMFUL/FATAL. GROUND
CONTAINERS WHEN POURING/LIMIT FREE FALL TO FEW INCHES. AVOID
SPONTANEOUS COMBUSTION OF CONTAMINATED RAGS /EASILY IGNITABLE
ORGANIC MATERIALS.

Exposure Controls

Respiratory Protection:OPEN AREA: NIOSH/MSHA APPROVED MECHANICAL FILTER
RESPIRATOR. RESTRICTED: CHEMICAL-MECHANICAL FILTER. CONFINED: AIR
LINE TYPE RESPIRATOR/HOOD. WEAR PROPERLY FITTED RESPIRATOR UNLESS
AIR MONITORING DEMO NSTRATES VAPOR/MIST LEVELS BELOW LIMITS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST: IN VOLUME/PATTERN TO KEEP
TLV BELOW RECOMMENDED LIMIT/TO CONTROL VAPOR CONCENTRATIONS.
Protective Gloves:NATURAL RUBBER/NEOPRENE/BUNA N/NITRILE
Eye Protection:GOGGLES
Other Protective Equipment:APRON
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHES BEFORE
REUSE. WASH HANDS THOROUGHLY BEFORE EATING & AFTER USING WASHROOM.
Supplemental Safety and Health
EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES. THIS PRODUCT CONTAINS
PIGMENTS WHICH MAY BECOME A DUST NUISANCE WHEN REMOVED BY ABRASIVE
BLASTING, SANDING, OR GRINDING.

Chemical Properties

Boiling Pt:B.P. Text:300-388F
Vapor Pres:2
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU AC
Percent Volatiles by Volume:52.81

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:EXTREME HEAT, SPARKS, OPEN FLAME, HOT
SURFACES, ELECTRICAL EQUIPMENT, & OTHER SOURCES OF IGNITION,
FREEZING
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN

Disposal

Waste Disposal Methods:DON'T FLUSH TO SEWER/WATERSHED OR WATERWAY.
DISPOSE OF PRODUCT IN ACCORDANCE W/APPLICABLE LOCAL, COUNTY, STATE
& FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.